Installation
7 7
1. Correctly locate the oven into its final operating position and
using a spirit level, adjust the oven feet so that the oven is level
and at the correct height.
Before using the new oven;
1. For first time use of the oven, operate the oven for about 1
hour at 200°C to remove any fumes or odours which may be
present.
2. Please refer to the Operation Section of this manual for details
on how to correctly operate and shutdown the oven.
Before leaving the new installation;
1. Check the oven functions in accordance with the operating
instructions specified in the ‘Operation’ section of this manual.
2. Ensure that the operator has been instructed in the areas of
correct lighting, operation, and shutdown procedure for the
appliance.
NOTE: If it is not possible to get the appliance to operate
correctly, shut off the gas and power supply and
contact the supplier of this appliance.
To Next Page
Loading...
Need help?
General
