To Next Page
P
Phillip MilesAug 13, 2025
Why does my Turfmech Allett Tournament 20 Lawn Mower leave occasional blades of uncut grass?
- MmichaelsilvaAug 13, 2025
Your Turfmech Lawn Mower might leave occasional blades of uncut grass for several reasons. The engine speed could be too slow, so try increasing it. Alternatively, the ground speed might be too fast; reduce your forward travel speed. Check if the height of cut is too high and reduce it if necessary. A poorly adjusted bottom blade can also cause this issue, so re-adjust it. If the cutting cylinder or bottom blade are blunt, they will need grinding or reconditioning. Lastly, a slipping drive belt can be the culprit, so adjust the belt tension.
General