Need help?Do you have a question about the Turin Networks TraverseEdge 100 and is the answer not in the manual?
General| Brand | Turin Networks |
|---|---|
| Model | TraverseEdge 100 |
| Category | Network Accessory |
| Language | English |
This chapter includes the following topics: Traverse Installation Process, Installation Checklists, Traverse Shelf Interface Specifications.
This chapter includes the following topics: Traverse System Configuration Example, Example Traverse Shelf Card Layout.
Covers specifications for fiber optic interface cabling, including connectors, backplane, and SFP modules.
Details specifications for electrical connector modules (ECMs) used for copper and coax interface cards.
Covers specifications for DS1 and E1 interface cabling, including ECMs and wiring schemes.
Details specifications for alarm interface, including contacts, output, and environmental alarms.
Covers specifications for timing interfaces, including clock references and connection types.
Details specifications for management interfaces, including GCM Ethernet and RS-232 connections.
Covers power system interface, including PDAP description and fan tray holder power interface.
Provides guidelines for cable routing, fiber optic, and copper/coax cable management.
Provides essential precautions for personal safety and equipment protection during installation and maintenance.
Provides step-by-step instructions for removing and replacing various back covers of the system.
Provides basic step-by-step instructions for inserting and removing cards from the Traverse shelf.
Provides step-by-step instructions for inserting fan modules and air filters into the Traverse system.
Provides an overview of hardware installation components and rack installation procedures.
Details procedures for standard horizontal-mount installation of Traverse shelf and fan tray holder.
Provides procedures for vertical and forward-mount installation of Traverse 2000 into a 19-inch telco rack.
Provides an overview of network interface cabling support for optical fiber and electrical cards.
Provides installation procedures for fiber optic cabling at the Traverse main backplane.
Provides installation procedures for DS1 and E1 cabling using DS1/E1 or E1 ECMs.
Provides installation procedures for DS3 and E3 cabling using DS3/E3 ECMs.
Provides installation procedures for electrical cabling of protected and unprotected Ethernet cards.
Provides step-by-step instructions on connecting visual, power, and fuse alarm cables and alarm interface cables.
Provides instructions on connecting timing inputs and outputs from central office sources to the Traverse shelf.
Provides instructions on connecting DCN Ethernet and RS-232 cables to the Traverse main backplane.
Provides an overview of power system equipment choices and PDAP description.
Provides step-by-step instructions on how to install a PDAP in a telco rack.
Provides instructions on connecting battery and battery return distribution cables to the PDAP.
Provides step-by-step instructions on how to connect battery and battery return supply cables to the PDAP.
Provides instructions for starting up and commissioning a Traverse shelf after hardware installation.
Addresses managing TE-206 node users and their privileges within the TransNav management system.
Provides card placement guidelines for Traverse shelves, including valid slot placement and protection schemes.
Provides checklists for hardware installation, cabling, and initial configuration steps.
To Next Page