Need help?Do you have a question about the Turtle Tough ULTRA Series and is the answer not in the manual?
General| Series | ULTRA Series |
|---|---|
| Color | Black |
| Weight | Varies by model |
| Dimensions | Varies by model |
| Water Resistance | IP68 |
Overview of the digital Total Suspended Solids (TSS) sensor and its applications.
Detailed specifications of the TSS sensor, including measurement range, accuracy, materials, and communication protocols.
Dimensional diagrams of the TSS sensor, with and without an automatic cleaning device.
Illustrates various pool-side and railing installation methods for the TSS sensor, with part identification.
Details the wiring terminations for connecting the Turbidity sensor to a system.
Outlines the default Modbus RTU communication settings for the sensor, including Baud Rate, Data Bits, Parity, and Stop Bit.
Explains how to read and write sensor data using Modbus registers, including using Modbus Poll software for reading/writing values and data format conversion.
Comprehensive table detailing Modbus registers, their addresses, read/write capabilities, data types, ranges, units, and descriptions.
Describes the process of calibrating the sensor using a single correction factor and the formula for calculation.
Details the procedure for multi-point calibration (2-point or 4-point) using Modbus Poll, specifying register addresses for calibration points.
Instructions for cleaning the sensor's lenses using water, detergent, and a rag to maintain accuracy.
Safety warning about not manually touching the sensor cleaning brush as it is motor-driven and can be damaged.
Important notes about not modifying sensor cables or connectors, as it voids the warranty and can compromise integrity.
Information required for returning goods, including model details, purchase order, fault description, and decontamination requirements.
Contact information for technical support, including phone number and website for sensor care, calibration, and wiring assistance.
Details Turtle Tough's product warranty terms, including coverage duration and conditions for repair or replacement.
Explains the electrochemical nature of sensors, their limited operating life, and exclusions from warranty coverage like wear and tear.
Outlines the standard shelf life for sensors and conditions for warranty claims related to stored products.
Information on warranty exclusion for damage to internal electronics, particularly from electrostatic discharge or improper handling.
To Next Page