5. VALIDATION
1º PROGRESSIVE ELECTRONIC ACCELERATOR LOCK
With the FAST MAX module installed in the vehicle and the MAGICKEY in
hand, disable the MagicKey by tapping the switch 3 times and wait for the LED to
flash 2 times and turn off, if it flashes 10 seconds and turns off repeat the process.
With the MagicKey deactivated ride with the vehicle, if the vehicle starts to
slow down until it locks the electronic accelerator fully or partially is working.
WATCH HOW
TO VALIDATE
2º ELECTRONIC ACCELERATOR RELEASE
With the FAST MAX module installed in the vehicle and the MAGICKEY in
hand, activate the MagicKey by tapping the switch 3 times and wait for the
LED to flash for 10 seconds and turn off, if it flashes 2 times and turns off
repeat the process.
With the MagicKey activated ride with the vehicle, if the throttle is
released and the vehicle does not decelerate until it fully or partially
locks, the electronic accelerator is working.
WATCH HOW
TO VALIDATE
www.tury.com.br
10
To Next Page
Loading...