www.tury.com.br
8
3.2 BATTERY MONITORING, INSERTION OR REPLACEMENT
MAGICKEY
CR2032
BATTERY
THIN
SCREWDRIVER
It is possible to monitor when the MagicKey's battery is low and time to be replaced, through the LED
signaling of the MagicKey during its activation, where the led will flash twice for 10 seconds, or through the
notification automatically generated on the home screen of the FAST MAX app.
To change the MAGICKEY CR2032 battery, simply remove the front cover using a very thin screw-
driver or some other tool that has a thin linear tip.
After removing the cover, view and remove the battery from the board slot and insert the new one in
the same position as the previous one, with the positive pole facing up.
Note: We recommend using high quality batteries.
To watch the video on how to replace the battery, tap the icon next to it.
WATCH HOW
TO REPLACE
BATTERY
SLOT
DIRECTION OF BATTERY
INSERTION OR REMOVAL
(POSITIVE POLE (+) UPWARD)
To Next Page
Loading...