Log in or register your account with your mobile
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the APP.
Mobile number/e-mail address
Region
Open the APP, selecting "+" on top right to add
device. Choose the type of device, for example
"Smart Lighting",and select the correct device
type.
Make sure your smart phone and Wi-Fi switch
module are under the same Wi-Fi network at
2.4GHz connection. Conrm when the beep
sound continuously for pairing mode.
Add Device
Help
that light blinks rapidly
Add Device
The pairing will take about 10-120 seconds to
complete depending on your network condition.
Connecting
Device found
Register device to the smart cloud
Initializing device
Make sure your router,mobile,and
device are as close as possible
2%
When pairing is done, the Wi-Fi switch will be
shown on the App.
WI-FI 2 Switch module
Device added successfully
Add Device
Connect to amazon alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device name
Basic information about the device
Supported Third-party
Control
Others
Others
Shared devices
Create Group
Device information
Feedback
Device Location
Check network
amazon
alexa
Google
Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
app wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
App control
APP
Confirm light blinks rapidly
Completed
Obtain verification code
Electrical
Add manually Search Device
Cancel
Home
Appliance...
Lighting
Devices
Lighting
Devices
(bluetooth)
Lighting
Remote
(bluetooth)
Lighting
Devices
(ZigBee)
kitchen
Security
& Sensor
sport
& Health
Add Device
Smart
Lighting
After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for 5
times (keep time interval not too short) or press
the reset key for about 10s until the beep sound
continuously for pairing mode.
Bedtoom
Restaurant
Kichen Light