24
By default the shift rpm is set to 7000 RPM. You can set
it to your convenience as per your riding habit.
Shift RPM indicator does not work when the vehicle is in
neutral or when the fifth gear is engaged.
Lean angle is calculated from the mobile device when
it is connected to the instrument cluster and lean
angle mode is set. The accuracy of the lean angle
information depend on the mobile device used,
orientation and placement of the mobile device on
the vehicle. Refer page No. 30 for detail procedure
connecting the mobile with the instrument cluster.
For best accuracy, it is recommended that the user to
mount the phone to a rigid part of the bike in vertical
position. Lean angle will not be displayed in
stationary condition.
14. Tachometer
Tachometer indicates the engine speed in multiples
of 1000 RPM (Revolutions Per Minute).
15. Lean angle indicator
When this mode is selected (refer page No. 30),
the tachometer indication will indicate the leaning
angle information of the vehicle and the same data
will be displayed at the bottom of the cluster as
shown.
To Next Page
Loading...
Need help?
General
