01
MATTERS NEEDING ATTENTION
1. After unpacking, please remove the corresponding fixation of XYZ axis according to the instructions to avoid
damage caused by forced movement of the machine.
2. Confirm whether the voltage gear of the machine is matched before starting the machine to avoid damage
to the machine power supply due to the mismatch of voltage gear.
3. The printer has 110VAC / 230VAC and other high voltage power interfaces. Do not use any other power cord
other than the one provided. Use approved power cords and sockets to ensure power cords are not damaged.
4. Do not place the printer in a large vibration or other unstable environment, the machine shake will affect the
printer print quality. It is recommended to place it in a well-ventilated and low-dust environment to avoid over-
heating of the machine.
5. Risk of scalding: Do not touch the nozzle and hot bed when the printer is working to prevent high tempera-
ture scalding. After printing, timely using the residual temperature of the nozzle to clean the consumables up
on the nozzle with the help of tools, and do not touch the nozzle with your hands directly during cleaning to
prevent scalding.
6. When the machine is running, please stay away from the parts in operation, and avoid poking your fingers or
other objects into the inside of the running printer to prevent injury.
7. Adult supervision: ensure that children do not have access to the machine, so as not to cause personal acci-
dents.
8. Do regular product maintenance: regularly in the case of power failure, use dry cloth to clean the printer
body, wipe dust and bonded printing materials, please lubricate and maintain the guide rail regularly.
9. In case of emergency, please turn off the power directly.
CATALOGUE
About your printer
Function definition
Machine parameters
Accessories list
Removal of limits
The machine assembly
01
02
03
04
05
06
Kind Tips
After the filament exits the extrusion head, it is recommended that you cut off the unfolded part of the
filament to prevent deformation of the filament from affecting the feeding of the filament. Thank you for
your understanding!
To Next Page
Loading...
