F3200/NDU AS4428.1 Installation Manual Document No: LT0255
Applications
Page 6-16 30 June 2004 Issue 1.04
AVI Mk2 (Continued)
The configuration of some commonly used signs is as follows.
Function Illuminate Tone Polarity Links
+/- Fitted
Top: FIRE ALARM Top Alert IN-T/IN-B -
Bottom: EVACUATE AREA Both Evac IN-B/IN-T -
Top: FIRE ALARM Top Alert IN-T/IN-B -
Bottom: DO NOT ENTER Both Evac IN-B/IN-T -
Top: DO NOT ENTER Top Evac IN-T/IN-B 3
Bottom: XXXX GAS DISCHARGE Both Evac*
1
IN-B/IN-T 3
Both: XXXX SYSTEM INOPERATIVE Both None IN-B/IN-T 1, 2
*1 The AVI Mk2 has a third tone (RH3), which could be generated on Gas Discharged.
Refer to the particular AVI instructions for setting the links as the function of the links
depends on the software version fitted.
Options for XXXX include: CO2; INERGEN; FM-200.