J
Joseph RogersAug 4, 2025
Why is there settlement in the extracted water from my Tyent Water Dispenser?
- CCharles PerryAug 4, 2025
Settlement in the extracted water may be due to excessive calcium in the source water (5 kgf/? or faster).
To Next PageTo Next PageWhy is there settlement in the extracted water from my Tyent Water Dispenser?
Settlement in the extracted water may be due to excessive calcium in the source water (5 kgf/? or faster).
What to do if my Tyent Hybrid Water Dispenser only extracts purified water?
If your Tyent Water Dispenser is only extracting purified water, try reducing the amount of raw water.
General| Brand | Tyent |
|---|---|
| Model | Hybrid |
| Category | Water Dispenser |
| Language | English |
Details the functional water creation process via electrolysis.
Details safety measures related to the unit's power cord and outlet usage.
Covers the filtration process using Activated Carbon and UF micro-Ceramic.
Highlights the unit's ability to produce various water types like alkaline, acidic, and neutral.
Lists safety features like automatic water stop and pH/ORP level adjustments.
Describes the automatic control via CPU chip for optimal operation.
Introduces the twin cell technology for enhanced hydrogen water production.
Identifies components visible on the front of the unit, like the LCD and outlet.
Details the components located on the rear of the unit, such as the hanging groove.
Shows the inflow and outflow ports on the bottom of the unit.
Explains the elements displayed on the screen when the unit is in standby mode.
Describes the display information shown during water outflow.
Details how backlight colors indicate water levels and prevent misdrinking.
Provides instructions for connecting the unit to a faucet.
Details the process for installing the unit directly under the sink.
Guides on connecting and securing the drain hose and faucet.
Instructions for choosing and dispensing alkaline water from the unit.
Steps for dispensing hydrogen-enriched water from the unit.
Guides on setting fixed water amounts for dispensing using QTY.C and Jog Dial.
Process for adjusting the pH levels for different water types using buttons.
Steps to change the unit's language setting via the control panel.
Instructions for setting the unit's clock and AM/PM format.
Guide to adjusting the volume of voice prompts and alerts.
How to enable or disable the unit's voice guidance features.
Explanation of the automatic power-saving mode and how to reactivate the display.
Details the automatic cleaning cycle after using acidic or turbo water.
Explains the cleaning process that occurs before dispensing purified water.
Describes cleaning when switching between water types without stopping outflow.