To raise the implement: Pull the lever back
To lower the implement: Push the lever forward.
After finishing the work, always lower the implement to the ground and switch off
the engine, Set the parking brake to avoid injuries and accidents .
▶Lowering speed control knob for the 3 point hitch
This knob controls the downward speed of the hydraulics three point linkage and is positioned at the front of
the driver’s seat.
To slow the downward speed- Turn the knob clockwise.
Adjust knob of hydraulic
descent speed
Warning
42
To increase the downward speed, turn the knob anticlockwise.
To lock the knob clockwise.
Do not over tighten the knob.
Always set the knob to lock when
1.Traveling on the road
2.Replacing tires or blades on an implement.
3.Making adjustments to an implement. Sudden dropping of an implement due to
hydraulic problems can cause serious injury or death.
Caution
To Next Page
Loading...
