NOTE: Do not use solvents to clean the seat. Use warm water with a little detergent added.
Before operating a Tractor it is important to adjust the seat to the most comfortable position
& check whether it is properly locked in its position. Figure 1 identifies the seat fitted to your Tractor.
* Damping type
* Sliding type
How to adjust the Seat
■
■■
■ Sliding Seat type
Lift lever (A) and slide the seat to the position you want. Release the lever.
Make sure the seat is locked in position.
■
■■
■ Damping Seat type
Lift lever (A) and slide the seat to the position you want. Release the lever.
Make sure the seat is locked in position. Turn knob (B) to adjust the height of the seat.
Turn lever (C) to adjust the damping effect of the seat.
The adjustment required will be dependant on the operator’s weight.
Check whether the seat properly locked in its position before driving the tractor.
Always use the seat belt when the ROPS is installed.Do not use the seat belt if a
foldable ROPS is down or there is no ROPS.Check the seat belt regularly and
replace if frayed or damaged
Danger
Danger
To Next Page
Loading...
Need help?
General
