THE QUICK START GUIDE
TO TYMO AIRFLOW
HOW TO CURL
HOW TO STRAIGHTEN
1.Ensure your hair is dry and detangled before using the device.
2.Plug in the device. The blinking white light indicates it's powered but
not yet activated.
3.Press and hold the power button for 3 seconds to activate the device.
It defaults to level 3 (360°F/80°C), and the cooling fan will automatically
turn on.
4.To change the heat level, briefly press the power button.
5.The indicator light for the chosen level will blink while heating and
remain solid once the temperature is reached.
6.Briefly press the fan button to deactivate the cooling fan if desired.
7.The plates will heat up in approximately 50 seconds.
Note: The barrel is not designed to heat.
8.Long-press the power button to turn off the device. The indicator
light will continue to blink as long as the device is plugged in.
1. Section Off :
Grab a 1-inch section
of hair, starting either
at the roots or mid-shaft.
4. Loosen Up :
After curling, use your
fingers to gently comb
through the curls for a
more natural look.
1. Section Off :
Grab a 1-inch section of hair.
from the roots down to the ends.
2. Smooth Glide : Gently glide the straightener
cool tip while gliding.
3. Precision : For more defined results, pinch the
5. Set & Hold :
For fine or soft hair, mist
with a holding spray to
maintain curl longevity.
6. Finish :
Your curled hairstyle is
now complete.
2. Orientation & Rotation :
Hold the curling iron
vertically and give it a
180-degree twist.
3. Glide :
Gently glide the iron towards
the ends of your hair. Slower
movement results in more
defined curls.
Need help?
General
