Need help?Do you have a question about the Tysso BCP-8000 and is the answer not in the manual?
General| Brand | Tysso |
|---|---|
| Model | BCP-8000 |
| Category | Barcode Reader |
| Language | English |
Lists key features of the BCP-8000 device, including its laser engine, battery, and keypad.
Details the standard package contents and optional items included with the BCP-8000.
Explains the function of each individual key on the BCP-8000's keypad.
Details the numeric and alphabetic input modes and functions of the keypad keys.
Guides on connecting the device to a PC via cradle for data transfer and battery charging.
Details the process of connecting the BCP-8000 to a PC using a USB cradle.
Describes the low battery indicator on the display and recommended actions.
Provides step-by-step instructions for replacing the main battery of the device.
Instructions for installing the necessary USB driver for the cradle connection.
Overview of procedures for uploading and downloading data between the device and PC.
Procedure to power on the BCP-8000 terminal.
Procedure to power off the BCP-8000 terminal.
Displays the main menu options available on the terminal.
Explains the process of uploading collected data from the terminal to a PC.
Provides instructions for deleting collected data from the terminal.
Provides information on memory capacity and the RAM Test function.
Allows configuration of terminal parameters like buzzer, backlight, and power settings.
Describes the test function for reading barcodes.
Explains self-test functions for the buzzer, LCD, LED, and keypad.
Enables setting the communication baud rate for data transfer.
Displays the kernel version of the terminal.
Details the terminal's SRAM structure and data/lookup file storage capacity.
Explains the warning message displayed when memory capacity is low.
Demonstrates the process of collecting data, including inputting employee ID and item details.
Explains how to use the lookup function to find inventory data based on item number.
Guide to uploading a custom BMP image to be used as the device's start image.
To Next Page