TZS First AUSTRIA FA-8006-3 - Optional Normal Weighing Mode; Warning Indications

4 5
ENGLISH
ENGLISH
OPTIONAL NORMAL WEIGHING MODE
(by passing parameter setting)
Auto step on weighing
1.
2.
3. 4.
1. Install battery and place the
scale on at oor
2. Step on the weighing platform
3. Display your weight
4. Digits ash, stabilized and
locked
WARNING INDICATIONS
Low Battery Indication
The battery power is running low, please replace with a new battery.
Over-load Indication
The weighing subject on the platform exceeds the maximum capability of scale. Please
step off to avoid damage.
Low Fat% Indication
The Fat% is too low. Please lead a more nutritional diet and take good care of yourself.
High Fat% Indication
The Fat% is too high. Please watch your diet and do more exercise.
Re-test
Error exists, please re-test to get the correct result.
FAT/HYDRATION/CALORIE MEASURING MODE
(1) Setting personal parameters
1. At the rst time when you install battery and switch on, all default parameter are set as follow:
Memory Gender Height Age
1 Male 165cm/5‘05.0“ 25
2. Parameters can be set in the following range:
Memory Gender Height Age
1~12 male/female 100~250cm/3‘03.5“~8‘02.5“ 10~100
3. Parameter setting
Power off
Press SET
(ON/SET) to
switch on
Press
to select
user code
Default
parameters
Press SET (ON/
SET) to conrm
and prompt to
next setting
Press SET (ON/
SET) to conrm
and prompt to
next setting
Press
to select
gender
Press
to set height
Press SET (ON/
SET) to conrm
and prompt to
next setting
Press
to set age
Tap on the
scale platform
LCD shows „0.0“Auto off after several seconds
Power off
Example: the 3rd user, female,
168cm, 28 years old, can set her
parameters as follow:
NOTE:
• During parameter setting, if idle
for 6 seconds, the parameters
already set will be memorized
automatically and LCD shows
„0“, meaning body fat measuring
will be started.
• If LCD prompt to show „0“
during parameter setting, press
SET (ON/SET) for 3 seconds
to return setting mode, then
you can set user code, gender,
height and age
(2) To Start Measuring
Power off
Press SET
(ON/SET) to
switch on
Show parameters of
the last user or default
parameters
Press
to select user code
or reset parameters
Tap on the
scale platform
LCD shows „0.0“
Step onto weighing
platform gently
(both feet touching
with metal
electrodes)
Wait until the digits
stabilize
Weight readings
locked and ash once
Measuring...
Measured results (Repeat for 3 times):
Weight: 52.8kg, Fat status, Fat 23.8%, Fat status i, Hydration 52.3%,
BMI 20,0, Calorie 1840.
Shut down automatically
(Make sure
your feet are
touching with
metal
electrodes on
the scale
platform, or
body fat can
not be
measured.)
To ensure
accuracy,
please remove
your shoes &
socks before
stepping on.
Example:
the 3rd user,
female, 168cm,
28 years old
can measure
as follow: