USER GUIDE
Control Defaults 1
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Control Defaults
* 115V models default to Fahrenheit.
220-240V models default to Celsius.
** Offset and Differential always expressed in °F.
Default Value
Fahrenheit/Celsius* °F °C
Defrost Duration Minutes 45
Next Defrost Hours 12
Thermistor Four OFFSET** 0 —
Thermistor Three OFFSET** 0 —
Thermistor Two OFFSET** 0 —
Thermistor One OFFSET** 0 —
Thermistor One Differential Up** 1 —
Thermistor One Differential Down** 1 —
Thermistor Four Set Point 0 -18
Thermistor Three Set Point 0 -18
Thermistor Two Set Point 42 6
Refrigeration Set Point 38 3
Light Key 1
Has Ice 0
Maximum Ice Set Point — —
Minimum Ice Set Point — —
Maximum Set Point 45 7
Minimum Set Point 34 1
To Next Page
Loading...
