Need help?Do you have a question about the U-Line BI1215 1000 Series and is the answer not in the manual?
General| Model Number | BI1215 |
|---|---|
| Category | Ice Maker |
| Series | 1000 Series |
| Refrigerant | R134a |
| Condenser Type | Air-Cooled |
| Door Style | Solid |
| Electrical Requirements | 115V/60Hz |
| Finish Options | Stainless Steel |
Provides contact details for general inquiries, service, and parts assistance, plus online resources.
Defines safety alert symbols (Danger, Warning, Caution) and provides general safety precautions.
Provides safety instructions for child entrapment and steps for proper unit disposal and recycling.
Specifies operating temperature ranges and conditions for optimal performance and warranty.
Details electrical grounding, power supply, and wiring requirements for safe installation.
Provides detailed measurements for the cabinet opening required for unit installation.
Illustrates the overall physical dimensions of the appliance, including handle and depth.
Instructions for installing two units adjacent to each other, including clearance and bracket use.
Details plumbing requirements, connection procedures, and cautions for the water supply.
Guidance on securing the unit to prevent tipping, ensuring stability and safety.
Covers final positioning, leveling procedures, and general installation tips for the unit.
Instructions for removing and installing the front grille or plinth for access and aesthetics.
Details required clearances for the door to open 90° when installed next to walls or cabinets.
Instructions on how to install the 90° door stop pin for controlled door opening.
Covers aligning the door for proper sealing and reversing the door swing direction.
Guidance for initial startup, including factory presets and recommended actions before first use.
Explains how the ice maker works, ice production, and proper handling of ice and the ice bucket.
Details on adjusting ice cube thickness and ice harvest settings for desired ice production.
Information on ensuring proper airflow for efficient operation and guidelines for loading products.
Instructions for cleaning exterior surfaces (vinyl, stainless, glass) and interior components.
Steps for manually defrosting the unit when frost build-up exceeds 1/4 inch.
Procedure for cleaning the condenser coil every six months to maintain operational efficiency.
Recommendations for preparing the unit for vacation or prolonged shutdown, including winterization.
Lists common problems, their possible causes, and remedies for issue diagnosis.
Procedure for accurately checking the actual product temperature inside the unit.
Information on optional accessories, including part numbers and prices.
Details the limited warranty terms, coverage periods, exclusions, and consumer responsibilities.
To Next Page