PAGE 1 OF 12 0222 IH-10013
1-800-295-5510
uline.com
DYMO
®
LABELWRITER
®
550 TURBO
H-10013
FEATURES
SOFTWARE INSTALLATION
PRINTER FEATURES
Your LabelWriter printer is a direct thermal printer and
does not use toner, ink cartridges or a ribbon. Instead, it
uses heat from a thermal print head to print on specially
treated labels. Labels are the only supply you will ever
have to buy.
Figure 1 depicts the major components of the printer.
The power button turns the label printer power on
and off.
The label forward feed button advances a single label.
The label reverse feed button reverses the label in the
label exit slot out of the slot and is used to remove
labels from the printer when changing rolls.
Software must be downloaded from the manufacturer's website.
Visit Dymo Support for more information.
Figure 1
Label Roll
Cover
Label Release Lever
Label Reverse Feed
USB Status
Light
Label Forward Feed
LAN Status Light
Label Spool
Label Guide
Power Port USB Port
LAN Port
Label Exit Slot
and Tear Bar
Power (On/Off)
Printer Status Light
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
To Next Page
Need help?
General
