U-Line Echelon CO2075FF - CO2075 FF Wiring Diagram; U-CO29 FF Wiring Diagram

28
Design
■
Features
■
Performance
REPLACING MOLD AND HEATER
1. Remove ice maker assembly. Refer to REPLACING ICE MAKER ASSEMBLY.
2. Remove one stripper screw (1) and stripper.
3. Remove three face plate screws (2) and face plate.
4. Remove one screw (3) and detach limit switch from mold.
5. Detach heater leads (4).
6. Remove two screws (5) and mold from support housing.
7. To assemble, replace parts in reverse order.
8. Install the ice maker assembly.
1
2
4
5
3
2
U-LINE1002
CO2075FF/2075RF & U-CO29FF MODELS