U-Line H-4564 - Error Codes and Resolutions; Troubleshooting Common Errors

20 OF 62 0721 IH-4564
ERROR CODES
ERROR CODES DESCRIPTION RESOLUTION
----- Overload Remove weight from the scale.
If the problem persists contact Uline Customer
Service.
Err 1 Date Setting Error Enter date using correct format.
Format: yy:mm:dd
Err 2 Time Setting Error Enter time using correct format.
Format: hh:mm:ss
Err 4 Zero Setting Error The scale was outside the normal zero setting
range either when it was turned on or when the
ZERO key was pressed.
Remove weight from the scale and try again.
Use the TARE key to set the display to zero value.
If the problem persists contact Uline Customer
Service.
Err 6 A/D out of range The values from the A/D converter are outside
the normal range. Remove weight from the
scale if overloaded, make sure fork cover plate
is attached.
Indicates the load cell or the electronics may
be faulty.
If the problem persists contact Uline Customer
Service.
1
-800-295-551
0
uline.com