U-Line H-7951 - Attach Bench Support Brackets; Repeat Bracket Attachment; Attach Benches to Brackets

PAGE 2 OF 9 0321 IH-7951
ASSEMBLY CONTINUED
Figure 2
Figure 3
3. Attach two bench support brackets to inground
mount pole using four 3/8 x 5" bolts, eight 3/8"
washers and four 3/8" nuts. (See Figure 2)
4. Repeat step three with remaining two bench support
brackets. (See Figure 3)
5. Attach bench to the bench support brackets using
four 5/16 x 1½" bolts, four 5/16" nuts and eight 5/16"
washers on each. Repeat for remaining three bench
seats. Ensure all bolts are fully tightened.
(See Figure 4)
Figure 4