U-Line H-9234 - Connecting Full Rafters to Crown; Attaching Eave and Side Poles; Securing Legs with Ratchet Straps

PAGE 3 OF 8 0221 IH-9234
ASSEMBLY CONTINUED
b. Align placement hole in the crown with hole in
rafter and insert pin. (See Figure 6)
c. Remove alignment hole pin and place in
adjacent protrusion alignment hole.
(See Figure 7)
4. Repeat steps b-c to connect the four full rafters (FR)
to the 8-way crown. (See Figure 8)
5. Beginning at a corner fitting, attach eave poles (EV)
to corner fittings and 4-way side tee fittings, working
clockwise around the assembly. (See Figures 9-10)
6. Loop end of each ratchet strap to fitting at each leg
location. (See Figure 11)
Figure 7
Figure 6
Placement
Hole
Figure 9
EV
EV
HR
Figure 10
Fi g ur e 11
Ratchet
Strap
Figure 8
FR
FR
HR
FR
FR
HR
HR
HR