PAGE 8 OF 8 0221 IH-9234
TAKING DOWN TENT CONTINUED
Figure 36
-800-295-551
5. Remove remaining legs. (See Figure 36)
6. Unfasten remaining straps until all are completely
disconnected.
7. Remove the tent top from the frame.
8. Fold and roll the tent top pieces as tightly as
possible. Use a fan fold or a z-fold for best results.
NOTE:
For longevity of the tent, do not stand or
walk on top of the tent top. It is recommended
to dry and wipe clean the tent top fabric
before folding for storage.
9. Bagging:
a. Place the folded tent top in an upright vertical
position.
b. Pull tent bag over the upright tent top.
c. Turn the tent top and bag over.
10. Disassemble all corner, side tee and center crown
fittings by removing pins and sliding tubing off
fittings. Work from perimeter of frame inward.
11. Remove all stakes. If using ballasting system, empty
water from barrels for storage.
To Previous Page
Loading...