U-Line U-ADA15IMS-00 User Manual

®
COMBO® MODELS &
MANUAL DEFROST
ICE MAKERS
USE AND CARE GUIDE
U-LINE.COM
The American Built-In Undercounter Leader Since 1962
U-CO29B-00
U-CO29B-03
U-CO29B-20
U-CO29BTP-20
U-CO29FB-00
U-CO29FWH-00
U-CO29WH-03
U-CO29WHTP-20
U-CO1175B-00
U-CO1175B-20
U-CO1175S-00
U-CO1175S-01
U-CO1175S-20
U-CO1175S-22
U-BI2115B-00
U-BI2115B-20
U-BI2115S-00
U-BI2115S-01
U-BI2115S-20
U-BI2115S-22
U-BI2115SOD-00
U-BI2115SOD-01
U-BI2115SOD-20
U-BI2115SOD-22
U-BI2115W-00
U-BI2115W-20
U-ADA15IMB-00
U-ADA15IMS-00
U-ADA15IMS-01
ULN-SP18B-03
ULN-SP18B-20
ULN-SP18WH-03
ULN-SP18WH-20
ULN-BI95B-00
ULN-BI95B-20
ULN-BI95BTP-03
ULN-BI95BTP-20
ULN-BI95WH-00
ULN-BI95WH-20
ULN-BI98B-00
ULN-BI98B-20
ULN-BI98WH-00
ULN-BI98WH-20

U-Line U-ADA15IMS-00 Specifications

General

Brand	U-Line
Model	U-ADA15IMS-00
Category	Ice Maker
Storage Capacity	25 lbs
Ice Type	Crescent
Ice Shape	Crescent
Finish	Stainless Steel
Energy Star Certified	No
Drain Type	Gravity Drain
Refrigerant	R-134A
Voltage	115V
Amperage	2.5A
Housing Material	Stainless Steel
Type	Undercounter

Summary

Introduction to U-Line Appliances

Please Record Your Model Information

Details on finding and recording model and serial numbers for assistance and warranty.

Notice for Users

Important notice to read all instructions before first use and keep the guide accessible.

Preparing for Service

Guidance on troubleshooting and operation sections before calling for service.

Safety Precautions and Guidelines

Important Usage Notice

Please read all instructions before installing, operating, or servicing the appliance.

Safety Alert Definitions

Defines Danger, Warning, and Caution labels for understanding risk levels.

General Safety Guidelines

General precautions for appliance use, including child entrapment and electrical safety.

Product Features Overview

Ice Makers Key Features

Details ice production, storage, water use, installation, and materials for ice maker models.

ADA15IM Model Specifics

Highlights factory installed door locks and stainless steel models for ADA15IM.

Combo Models Key Features

Features mechanical temperature control and adjustable tempered glass shelves.

CO1175 and B12115 Model Features

Includes adjustable leveling legs and stainless steel model options.

B12115 Model Additional Features

Covers optional door panel kits and self-closing door functionality.

Product Operation Basics

Air Flow Requirements

Emphasizes proper air flow for efficiency; do not block grille or internal fans.

Initial Unit Startup

Recommends overnight run-in and discarding initial ice production.

Understanding the Control Dial

Explains how the control dial manages temperature zones and settings.

Adjusting Appliance Settings

Temperature Adjustment Guide

Advises incremental adjustments and waiting 24 hours for temperature stabilization.

Ice Harvest Adjustment

Instructions to adjust ice cube size by turning a screw clockwise or counterclockwise.

Checking Product Temperature

Method for Checking Internal Temperature

Steps to check actual product temperature using a water bottle and thermometer.

Factors Affecting Internal Temperature

Lists influences like ambient temperature, door openings, and airflow obstruction.

Ice Maker Functionality

Ice Maker Operational Overview

Explains automatic shut-off, continued cooling, and frost-free differences.

Ice Compartment Usage Notice

Warns against placing items in the ice compartment and how to turn off ice production.

Ice Cube Thickness Adjustment

Details on adjusting ice cube size via the ice maker assembly control box screw.

Ice Maker Adjustment Caution

Warning against using sharp instruments and over-adjusting the ice maker screw.

Maintenance Procedures

Unit Leveling Instructions

Guidance on leveling the unit using adjustable feet or a level surface for proper operation.

Leveling Operation Notice

Requirement for the unit to be level for proper door and ice maker function.

Interior Shelf Management

Removing and Installing Interior Shelves

Step-by-step guide for removing and installing interior glass shelves.

Grille Installation and Removal

Grille Removal Safety Warning

Disconnect power before removing grille; avoid touching sharp condenser fins.

Steps for Grille Removal

Instructions for removing the grille, including control knob and screws.

Steps for Grille Installation

Guidance on installing the grille and grille cap for various model types.

Door Shelf Maintenance

Removing and Installing Door Shelves

Guides for removing and installing shelves located on the inside of the door.

Standard Door Adjustments

Door Alignment and Sealing

How to align and adjust the door for proper sealing and to prevent frost formation.

Door Alignment Notice

Ensures proper gasket contact and prevents pinching on the hinge side of the door.

Door Reversability Options

Information on which models are field-reversible and how to determine hinge needs.

Procedure for Reversing the Door

Explains hinge hardware removal and reinstallation for changing door swing direction.

Reversing Door Swing (Black/White)

Removing the Door for Reversal

Steps to remove the door, including hinge screw pin and closer inserts.

Managing Hinge Hole Plugs

Instructions for removing and saving plastic screw plugs from hinge locations.

Removing the Existing Top Hinge

Guide to removing the existing top hinge from the appliance cabinet.

Self-Closing Door Adjustments

Door Alignment and Proper Sealing

Details on aligning the door for proper seal, noting the 1/8" gap at the top.

Door Sealing Verification

Ensures proper gasket contact and avoids pinching, with a note on top edge alignment.

Model Door Reversability Chart

A table listing various U-Line models and their door reversability status.

Reversing Stainless Steel Glass Doors

Removing Door Components

Steps to remove the door, hinge screw pin, and plastic hole plugs.

Managing Hinge Hole Plugs (SS)

Instructions for removing and saving plastic screw plugs from new hinge locations.

Removing Door Stainless Frame

Steps to remove screws from the door and detach the pivot plate.

Stainless Frame Assembly and Hinge Orientation

Assembling the Stainless Frame

Guides on how to reassemble the stainless frame onto the door.

Orienting Hinges for Reversal

Instructions for removing and reinstalling the existing top hinge.

Reinstalling Hinge to Opposite Side

Guide to reinstalling the removed top hinge to the bottom opposite cabinet side.

Bottom Hinge Reinstallation and Door Installation

Reinstalling Bottom Hinge

Instructions to reinstall the removed bottom hinge to the top opposite cabinet side.

Reinstalling Hinge Hole Plugs

Instructions for installing plastic screw plugs into unused hinge holes.

Installing the Door After Reversal

Steps for installing the door onto the reoriented hinges and securing it.

Final Door Alignment

Refers to Door Alignment and Adjustment on page 10 for final adjustments.

Cleaning and Defrosting

Exterior Cleaning Methods

Guidance for cleaning vinyl clad and stainless steel exterior surfaces.

Interior Cleaning Methods

Instructions for cleaning the interior and removable components with mild detergent.

Manual Defrost Requirements

Explains manual defrost needs and frequency for build-up of 1/4" or more frost.

Defrosting Safety Precautions

Warns against using sharp instruments or heaters to speed up defrosting.

Steps for Manual Defrosting

Step-by-step guide for performing a manual defrost procedure on the unit.

Ice Bucket Cleaning Note

States the ice bucket is not dishwasher safe and to discard initial ice batches after defrost.

Condenser Maintenance and Unit Storage

Condenser Cleaning Schedule

Recommends cleaning the condenser every six months for optimal operational efficiency.

Condenser Cleaning Safety

Disconnect power before cleaning; avoid touching sharp condenser fins.

Condenser Cleaning Method

Do not use cleaners on the condenser unit; use a soft brush or vacuum.

Storage and Vacation Warning

Electrical shock hazard warning before servicing or operating the unit.

Storage Preparation Instructions

Unplug, drain unit if temps drop, and keep cabinet open to prevent mold.

Product Disposal Guidelines

Child Entrapment Danger Warning

Child entrapment warning before disposing of old appliances; remove doors.

Service and Support Information

When to Call for Service

Guidance on checking operations and troubleshooting before contacting U-Line service.

Information Needed for Service

Instructions on what product information (Model/Serial) to provide when calling U-Line.

Importance of Genuine Replacement Parts

Emphasizes using genuine U-Line parts for safety, performance, and warranty.

Understanding Normal Operating Sounds

Describes common sounds like compressor hum or refrigerant flow.

Troubleshooting Common Issues

Electrocution Hazard Warning

Electrocution hazard warning before attempting any repairs or maintenance.

Troubleshooting Problem Guide

A table listing common problems, their possible causes, and recommended remedies.

Product Information Resources

Online Resources for U-Line Products

Information on where to find installation guides, specs, and other documentation online.

U-Line Service Contact Information

General Inquiries and Sales Contact

U-Line Corporation contact details for general inquiries and sales departments.

Service Assistance Contact

U-Line contact details for technical support and service assistance.

Parts Assistance Contact

U-Line email address specifically for ordering replacement parts.

Company Innovation and Product Lines

U-Line History and Product Range

Company history, innovation focus, and overview of product lines and series.