PAGE 5 OF 5 0614 IH-974
PRINT A CONFIGURATION LABEL
A configuration label lists the printer settings that are
stored in configuration memory. After the media is
loaded, print a configuration label as a record of the
printer's current settings.
1. On the control panel, press SETUP/EXIT.
2. Scroll through the parameters until you reach LIST
SETU P.
3. Press SELECT to select the parameter.
4. Press PLUS (+) to confirm printing.
5. A configuration label will print. (See Figure 16)
d. Close printhead assembly. (See Figure 14) e. Wind ribbon clockwise onto ribbon take-up
spindle. (See Figure 15)
LOADING RIBBON CONTINUED
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
Figure 14 Figure 15
Figure 16
Ribbon Take-Up
Spindle
To Previous Page
Loading...
