U.S. General 94057 User Manual (English)

To Next Page

ASSEMBLY & OPERATING INSTRUCTIONS

ALUMINUM LOADING RAMP

1200 LBS. CAPACITY

94057

Diagrams within this manual may not be drawn proportionally.

Due to continuing improvements, actual product may differ slightly from the product described herein.

Distributed exclusively by Harbor Freight Tools

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2005 by Harbor Freight Tools

or any artwork contained herein may be reproduced in any shape or form without the

express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

Need help?

Do you have a question about the U.S. General 94057 and is the answer not in the manual?

U.S. General 94057 Specifications

General

Basic safety precautions to reduce risk of personal injury and equipment damage during product use.

Ensure bystanders are clear, especially children, and have assistants.

Do not exceed capacity; ensure vehicle is secured and engine off.

Position ramp securely on tailgate and load vehicle slowly with assistance.

Separate ramps by removing hinge bolts and nuts.

Align hinges and insert bolts and nuts to rejoin ramps.

Clean ramp after each use and inspect for damage or wear.

Before each use, check hinge bolts and nuts for tightness.