uAvionix AV-30-C - Editing Presented Data in AI Mode

UAV-1003946-001, AV-30-C Pilot’s Guide 19 Revision D
Page
Figure 8 – UI Customization - Field Selection
A second push of the lower left options MENU button will bring up the
second menu. Menu options related to the current screen are displayed.
7.3.2 Edit Presented Data
The following shows the display when the edit mode is active. Rotating
the knob left and right will then select from the various overlay values that
can be presented in the selected field.
When the desired data type is presented, pressing the knob in
will accept the current value, and the edit mode will remain
active.
Pressing the DONE shown in the lower left button will accept
the current value and exit the UI customization mode.