uAvionix AV-30-C - AoA Indication in AI Mode

UAV-1003946-001, AV-30-C Pilot’s Guide 27 Revision D
Page
7.4.7 AoA Indication
Derived Angle of Attack can be configured for display in the inner left area
of the screen and consists of a series of colored stacked bars that
indicates the current AoA relative to the configured minimum and
maximum limits.
The lowest green bar corresponds to a current AoA matching the
configured lower limit point. The first red bar corresponds to a current AoA
matching the configured upper limit.
AoA limit points are pilot selectable and are set in the
pilot accessible Setup Menu.
Figure 18 - AI Mode, AoA Indication
AoA is determined by the difference between the aircrafts pitch angle and
the path through the air. See §11 - AoA Operation and Configuration for
additional details on the AoA operation and setup.
Angle Of Attack
Pitch Angle
Flight Path
Level Ref
Figure 19 – AoA Computation