UAV-1003946-001, AV-30-C Pilot’s Guide 28 Revision D
Page
7.4.8 Vertical Trend Indicator
Vertical trend can be configured for display in the inner right area of the
screen and consists of a white tic mark on a background scale. The upper
and lower limits of the scale correspond to ±1000 feet per minute. This
display augments the existing vertical speed in the aircraft but does not
replace its functionality.
Figure 20 - AI Mode, Vertical Trend Indication
7.4.9 G-Load Indicator
The current G-Load can be configured for display on the inner right or left
area of the screen and consists of a ball marker on a background scale.
The upper and lower limits of the scale correspond to the upper and lower
G limits set in the pilot accessible Setup Menu.
Figure 21 - AI Mode, G-Load Indication
The center most tic mark represents 1.0 G. Values above the center mark
represent positive G, while those below represent less than 1.0 G levels.
The scale markers will change color based on G limits set.
See §9 - Alerts and Alert Limits for additional G limit alerting details.
To Next Page
Loading...
