uAvionix AV-30-C - AI and DG Displayable Parameters

UAV-1003946-001, AV-30-C Pilot’s Guide 33 Revision D
Page
interfaced, this page also allows control and monitoring of the transponder
as detailed in §7.7 - Reversionary AI. This mode page cannot be
customized by the pilot.
7.6 AI / DG Displayable Parameters
The following table shows which data fields can be presented when
operating in AI and DG modes.
The presentation type of graphical indicates that the data is presented in a
graphical format (dial, tape, bug, etc.), while a presentation type of text
indicates that a textual presentation is available.
The OAT field indicates that an OAT probe must be installed for this
parameter to be selectable.
The GPS field indicates that a connection to an external GPS navigator is
required for the parameter to be selectable.
Table 1 - Data Overlay Types vs Operational Mode
Data Type
Presentation
AI Mode
DG Mode
OAT
GPS
Blank Overlay Field
N/A
✓
✓
Attitude
Graphical
✓
✓
Non-Slaved Heading
Graphical
✓
✓
Bus Voltage
Textual
✓
✓
G Load Value
Textual
✓
✓
G Load Indicator
Graphical
✓

Indicated Airspeed
Textual
✓

Barometric Corrected
Altitude
Textual
✓

Angle of Attack
Graphical
✓

Vertical Trend Indicator
Graphical
✓

Vertical Speed
Textual
✓

Set Altitude
Textual
✓
