21
UAV-1001006-001
ECCN 7A994
4. Launch the Echo App on your tablet or Smartphone.
Verify that “EchoUAT is the Selected Device Type.
8.2 Configuration
The configuration section will set the following parameters:
• Control
• ICAO Number
• Call Sign
• Flight Plan ID
• CSID Logic
• Anonymous Mode
• Emitter Category
• VFR Code
• ADS-B In Capability
• Vso
• Aircraft Length and Width
• GPS Antenna Offset
8.2.1 Control
Select the desired control type. This setting configures the echoUAT for
Transmit, Receive or Standby.
• UAT TX Enabled: Enables both transmit and receive functions.
• Receive Only: Disables transmission but continues to receive and
provide ADS-B data to a GDL90 compatible display or application.
• Standby: Disables both transmit and receive functions. GDL90
position data (GPS) is still available from the device.
To Next Page
Loading...