36 37
Protective Apparel
As with all on- and o-road bikes, motorcycles, and
mopeds, basic safety apparel should be worn to
protect yourself.
You MUST always:
A Wear a well-fitting helmet securely fastened
that provides good all-round visibility.
New Zealand and Australia require you to
wear a helmet that meets AS/NZS 1698:2006
for road use. For o-road use under 30km/h
you may use a helmet that meets NZS 8600.
The US requires you to wear a helmet that is
DOT compliant.
A Wear adequate protective clothing and
sturdy, fully enclosed shoes to protect your
feet and ankles.
We also recommend you:
A Make yourself easy to see by wearing
reflective or high visibility clothing.
A Wear gloves to protect yourself from
knocks, scrapes, and the elements.
A Wear eye protection if your helmet does not
provide it to protect yourself from branches,
stones, and the elements.
Passengers
We recommend that only one person rides on the
2×2 at any one time. We do not advise that children
or inexperienced drivers operate the 2×2.
Lights
As a required safety feature, the front and rear
lights turn on automatically when the bike is in
“RUN” mode. Ensure the high beam headlight
setting is only used when required and not when
it could impair oncoming trac.
Directional Indicators
Always use the directional indicators to signal
intended lane changes and turns.
Directional indicators, reflectors, rear light, number plate holder and mirrors on the road version only.