5 — English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s
Manual
To reduce the risk of injury, user must read and understand operator’s manual before
using this product.
Eye and Hearing
Protection
Always wear eye protection with side shields marked to comply with ANSI Z87.1 or
equivalent standard, along with hearing protection.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Recycle Symbol
Do not dispose of electric tools together with household waste material. Electric tools
and electronic equipment that have reached the end of their life must be collected
separately and returned to an environmentally compatible recycling facility. Check with
your local authority or retailer for recycling advice and collection point.
V Volts Voltage
min Minutes Time
Direct Current Type or a characteristic of current
n
o
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious
injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious
injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or mod-
erate injury.
(Without Safety Alert Symbol) Indicates important information not related to an injury hazard,
such as a situation that may result in property damage.
To Next Page
Loading...