Need help?Do you have a question about the Ubiquiti air Grid M2 AGM2-HP-1114 and is the answer not in the manual?
Lists all items included in the product packaging.
Securely mount the feed support and L bracket to the grid reflector.
Connect the Ethernet cable through the feed support to the antenna.
Place the antenna feed into the feed support until it locks.
Install the bushing for cable management in the feed support.
Mount the assembled airGrid unit onto a pole using provided hardware.
Set up wireless parameters, including antenna size selection.
US Federal Communications Commission rules compliance.
Canadian radio standards compliance.
Safety guidelines regarding radio frequency exposure.
Indicates product conformity with EU directives.
Notes restrictions on product use indicated by an alert sign.
Official statement of compliance with EU directives in English.
Links to support, wiki, and downloads for assistance.
To Next Page
General