Accessing the Configuration Interface
Connect to the Configuration Interface:
1. Ensure that your computer (or other host machine) is connected to the Management port
on the EdgeSwitch.
Note: By default, you can configure the EdgeSwitch via any port; however, we
recommend the Management port. (Access to the Configuration Interface can be
limited to the Management port only. You can configure this setting on the
Device tab.)
2. Configure the Ethernet adapter on your host system with a static IP address on the
192.168.1.x subnet (e.g., 192.168.1.100).
3. Launch your web browser. Type https://192.168.1.20 in the address field. Press enter
(PC) or return (Mac).
4. Enter ubnt in the Username and Password fields. Click Login.
To Next Page
Loading...
