Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer’s label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire
hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided
only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has an integral safety
ground wire intended for connection to a grounded safety outlet.
1. Do not substitute the power cord with one that is not the provided approved type.
Never use an adapter plug to connect to a 2-wire outlet as this will defeat the
continuity of the grounding wire.
2. The equipment requires the use of the ground wire as a part of the safety
certification, modification or misuse can provide a shock hazard that can result in
serious injury or death.
3. Contact a qualified electrician or the manufacturer if there are questions about the
installation prior to connecting the equipment.
4. Protective earthing is provided by Listed AC adapter. Building installation shall
provide appropriate short-circuit backup protection.
5. Protective bonding must be installed in accordance with local national wiring
rules and regulations.
Limited Warranty
ui.com/support/warranty
To Next Page
Loading...
