System LED
RJ45 Link/Speed/Activity LED (Ports 1- 5)
PoE In Port
Ports 2 - 5
Flashing White Initializing.
Steady White Factory defaults, waiting for adoption.
Alternating White/Blue
Device is busy; do not touch or unplug it. This usually
indicates that a process such as a rmware upgrade is
taking place.
Steady Blue Successfully adopted by a network and working properly.
Flashing Blue
This is used to locate a device.
When you click Locate in the UniFi Controller software,
the System LED will ash blue. The software will also
display the location of the UniFi Switch on the map.
Off No Link
Amber
Link established at 10/100 Mbps
Flashing indicates activity
Green
Link established at 1000 Mbps (1 Gbps)
Flashing indicates activity
This RJ45 port supports a 10/100/1000 Mbps Ethernet connection and 802.3af/at PoE
input.
RJ45 ports support 10/100/1000 Mbps Ethernet connections.
USW-Flex-Mini Quick Start Guide
To Next Page
Loading...
