Ubiquiti UniFi - Latency; Throughput; Chapter 4: Dashboard

39
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 4: Dashboard
Chapter 4: Dashboard
The Dashboard screen provides a visual representation of
your network’s status. Basic information is provided for
each node:
• Latency
• Throughput
• “WAN” on page 40
• “LAN” on page 40
• “WLAN” on page 41
Latency
The latency value from the latest Speed Test is displayed.
The monitor is color-coded to indicate status:
Black A UniFi Security Gateway is active, and the Speed
Test is available.
Red The Speed Test is not available because it requires an
active UniFi Security Gateway.
Throughput
The throughput value from the latest Speed Test is
displayed. The monitor is color-coded to indicate status:
Black A UniFi Security Gateway is active, and the Speed
Test is available.
Red The Speed Test is not available because it requires an
active UniFi Security Gateway.
Status information Place your mouse over the Latency or
Throughput monitor to display the following:
WWW
Current status information is displayed.
• Gateway Displays the IP address of the service
provider’s gateway.
• DNS Displays the IP addresses of the Domain Name
System (DNS) servers.
• IP Displays the Internet IP address of the UniFi Security
Gateway.
• Uptime Displays the length of time the Internet
connection has been active.
• Latency Displays the amount of time it takes a packet
to travel from the UniFi Security Gateway to the service
provider’s gateway.
• Up Displays the upload rate of your Internet
connection.
• Down Displays the download rate of your Internet
connection.