Ubiquiti UVP - Configuration File Content Examples

40
UniFi
®
VoIP Phone User Guide
Ubiquiti Networks, Inc.
Appendix B: DHCP Option 66 Autoprovisioning
Configuration File Content Examples
The following is an example of the configuration file. In most cases, the phone administrator can work out a template based
on this to extend and provision a group of phones.
Version 2 Parameters Supporting App Versions 5.0.4.610
<?xml version=”1.0” encoding=”UTF-8” ?>
<provision version=”10000”>
<!-- U00003 value: 0: DHCP mode(default), 1: Static-IP mode. U00004, U00005, U00006, U00007, U00008 values will be all
ignored if in DHCP mode. -->
<U00003> 0 </U00003>
<U00004> 10.2.0.200</U00004>
<U00005> 24 </U00005>
<U00006> 168.95.192.1 </U00006>
<U00007> 8.8.8.8 </U00007>
<U00008> 10.2.0.254 </U00008>
<!--# Codec list priority sequence-->
<U00009>111, 9, 0, 8</U00009>
<!--# Log level: 0 ~ 6: Default: 4 -->
<U00010>6</U00010>
<!--# Software EC -->
<U00011>1</U00011>
<!--# DNS SRV -->
<U00012>1</U00012>
<!--# Stun servers -->
<U00013>stun.server</U00013>
<!--# DTMF type -->
<U00017> 1 </U00017>
<!--# Immersive mode -->
<U00018>0</U00018>
<U00026> en_US </U00026>
<U00027>GMT+8</U00027>
<!--# Account 1-->
<!--# Account Active. 0 - No, 1 - Yes. Default value is 0-->
<U10000>1</U10000>
<!--# SIP Server-->
<U10002> 10.2.0.35 </U10002>
<!--# SIP User ID-->
<U10005>989 </U10005>
<!--# SIP password-->
<U10006>ubnt</U10006>
<!--# SIP auth id-->
<U10007></U10007>
<!--# SIP display name-->
<!--<U10008></U10008> -->
<!--# SIP display extension-->
<!--<U10009></U10009> -->
<!--# SIP voicemail number-->
<!--<U10010></U10010> -->
<!--# SIP Outbound Proxy-->
<U10011></U10011>
<!--# SIP Registration Expiry -->
<U10014> 600 </U10014>