Ubiquiti UVP - Chapter 1: Overview

1
Chapter 1: OverviewUniFi® VoIP Phone User Guide
Ubiquiti Networks, Inc.
Before You Begin
Remove the protective covering from the handset.
UVP, UVP-Pro
UVP-Executive
Remove the protective film from the touchscreen.
UVP, UVP-Pro
UVP-Executive
Chapter 1: Overview
Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi®
VoIP Phone. This User Guide is for the following models:
Model Description
UVP Unifi VoIP Phone
UVP-Pro Unifi VoIP Phone Professional
UVP-Executive Unifi VoIP Phone Executive
Note: Throughout this User Guide, UniFi VoIP Phone
refers to any of the models. If a specific model
needs to be identified, its model number is used.
When one illustration is used for multiple models,
all significant differences between those models are
identified.
The UniFi VoIP Phone is designed to integrate easily into
a UniFi network. The phone interface is based on the
popular Android
™
platform for ease of use. This User Guide
explains how to install the UniFi VoIP Phone, provides
setup instructions for third-party PBX systems, and shows
how to use the phone’s user interface.
Package Contents
Enterprise VoIP Phone
with 5" Touchscreen
Model: UVP
UniFi VoIP Phone Quick Start Guide
Enterprise VoIP Phone with
5" Touchscreen, Bluetooth,
WiFi, and Built-In Camera
Model: UVP-Pro
UniFi VoIP Phone Professional Quick Start Guide
Enterprise VoIP Phone with
7" Touchscreen, Bluetooth,
WiFi, and Built-In Camera
Model: UVP-Executive
UniFi VoIP Phone Executive Quick Start Guide
Installation Requirements
• UniFi Switch or PoE (802.3af-compliant) switch
• UniFi Controller
• Third-Party SIP/PBX Provider
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s responsibility
to follow local country regulations and indoor cabling requirements.