Ublox NINA-W106 - Page 54

NINA-W1 series - System integration manual
UBX-17005730 - R11 Revision history Page 54 of 55
C1 - Public
Revision history
Revision Date Name Comments
R01 23-Mar-2017 fbro Initial release.
R02 30-Jun-2017 mwej, cmag Updated the product status to
Engineering Sample. Added info about band
pass filter. Updated best conducted Wi-
Fi sensitivity to
-96 dBm (section 1.3.1
). Added additional information about software update
(sections 2.3 and 2.5). Removed disclosure restriction.
R03 17-Oct-2017 cmag, kgom,
mwej
Modified the software version to 1.0.0 for NINA-
W13 series in the table on
page 2. Included information about the open CPU variants – NINA-
W101 and
NINA-W102. Updated section 1 and classified the information for NINA-
W13
series and NINA-W10 series separately. Updated Software section (section 2
)
with more information about NINA-W13 and NINA-
W10 software updates.
Updated Block diagrams. Included reference to NINA-W101 and NINA-
W102
modules in section 3. Minor changes in section 3.2.2.
R04 5-Mar-2018 ajah, mhan,
cmag, kgom
Updated the product status to Initial Production. Modified the
product
description (section 1.3
) and information about Boot strapping pins (section
1.6.1). Added output power configuration (section 2.9
). Updates Approvals
(section 5). Updated Production test (section 6.1
) with test and calibration
information. Provided reference to NINA-W10 series data sheet in the Related
documents section.
R05 20-Apr-2018 cmag, kgom Updated type numbers and u-connectXpress
version in the second table on
page 2 with NINA-W13x-00B-01 and 1.0.1 respectively. Updated the Wi-
Fi
output power configuration for NINA-W10 series (section 2.9.1.1).
R06 6-Dec-2018 mwej, fbro Added support for NINA-W15 in many sections. Added support for RMII
.
Removed LPO clock support for NINA-W13 and NINA-W15.
R07 18-Dec-2018 fbro, kgom Modified the product status to Initial Production for NINA-W131-01B-
00 and
NINA-W132-01B-00. Updated Bluetooth power (section 2.9).
R08 12-Jul-2019 fbro, flun,
kgom
Updated the product status for NINA_W15x to Initial Production.
In section
1.1, removed the footnote related to pending modular approvals.
Updated
soldering profile (Table 6). Updated Wi-
Fi output power configuration for
NINA-W10 series (section 2.9.1 ). Minor corrections in section 2.7.2.
R09 25-May-2020 Mlju, hekf Updated Applicable Products section and added NINA-
W106 and W156
modules. Revised software sections 2.1 and 2.2. Introduced the design-
in of
W1x6 in section 3.3.3.2. Updated ESD Table 5. Added u-connect and s-
center
user guide references [7] [8].
R10 15-Jul-2020 flun Clarified chapter 2.5 with regards to ESP-IDF v3 and ESP-IDF v4:
Added chapter 2.5.5 noting
CONFIG_SPI_FLASH_USE_LEGACY_IMPL must
be set to Y if using ESP-IDF 4.0 for NINA-W101/102. and that on NINA-
W106,
CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP
and
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V must be set to Y, and it may
be required to add the
--no-stub parameter to esptool.py
during
programming.
Added ESP IDF 4.0 output power configuration to chapter 2.7.1.
Modified the product status to Prototype for NINA-W106.
Updated glossary.
R11 30-Sep-2020 flun Added SPI in section 1.7.3. Updated boot strapping pins in section 1.6.1
, and
clarified RTS/CTS pins in section 1.7.1.
Clarified software update requirements in section 2.
Updated the Glossary, Document information and Related documents.