MOUNTING ULTIMA IN SI TECH QCS OVAL SYSTEM
1. Remove the stiff oval ring from the suit arm. Use the
tool if is too hard by hand. Check the seal for damage.
Watch the instruction video on www.waterproof.eu
Wrist seal
Glove ring
Suit arm with
mounted PU-ring
Ultima
suit ring
The Ultima Dry Glove System is designed to fit directly in to the Waterproof ISS system or SI TECH QCS oval
system. This means the only thing you need to do is to remove the stiff plastic ring from the suit arm and replace
it with the Ultima suit ring. IMPORTANT! Do not remove the softer PU-ring that is glued into the suit. This ring is
the ’docking station’ for the Ultima suit ring.
To Next Page
Loading...