DONNING AND DOFFING
1. Put on the suit and fit the equalization tube between seal and
wrist.
2. Put on the dry glove and press the glove ring and suit ring
together at one side.
3. Press on the opposite side until you feel the glove connects
properly.
4. Continue pressing the rings
together on all sides to be sure you
have a perfect connection.
5. Adjust the angle of the glove by
turning the glove ring to the
preferred position.
OPEN THE RING
1. Push the protruding part of the glove ring into the corresponding opening on the other ring.
2. Press the arms tightly against the body and at the same time twist until the ring comes loose. Repeat the same
procedure on the other hand.
Watch the instruction video on www.waterproof.eu
To Next Page
Loading...