EasyManua.ls Logo

Ultimate T3-2050 - Amplifier Features; Class AB Models; Class D Models

Ultimate T3-2050
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
T3-Series
• 2 Ohm Stable Amplifier
• MOSFET Power Supply
• Multi-Channel Capable
1
• Illuminated dual-function “Ultimate” logo
• Digital voltage and temperature meters
• Overload Protection Indicator
• Gold Plated RCA Connections
• Low Level Input – variable up to 8 volts
• High Level Input – variable up to 10 volts
• Gold Plated Terminal Block for Power Input & Speaker Output
• Crossover Selection Switch for LPF / Full / HPF
1
• Variable Low Pass Filter Control from 40 to 200Hz
2
• Variable Low/High Pass Filter Control for 40 to 400Hz
1
• Variable Bass Boost Control from 0 to 18dB at 45Hz
• Subsonic filter with 24db/oct cut-off – switched 20, 30, 40Hz
3
• Protection Circuitry against Short, Overload and Thermal
Features
Class AB – T3-2050, T3-2100, T3-4075, T3-1250
1 Not available on T3-1250 2 T3-1250 only 3 T3-2100, T3-1250 only
• 2 Ohm Stable Amplifier
• MOSFET Power Supply
• Illuminated dual-function “Ultimate” logo
• Digital voltage and temperature meters
• Overload Protection Indicator
• Gold Plated RCA Connections
• Low Level Input – variable up to 8 volts
• High Level Input – variable up to 10 volts
• Gold Plated Terminal Block for Power Input & Speaker Output
• Variable Low Pass Filter Control for 40 to 200Hz
•
V
ar
iable Bass Boost Control from 0 to 18dB at 45Hz
• Subsonic filter with 24db/oct cut-off – switched 20, 30, 40Hz
• Protection Circuitry against Short, Overload and Thermal
Class D – T3-500D, T3-1000D
5