7.4 USB mode
Step I : Connect the projector to the USB.
Step 2: Press and hold the Source button -a
of the projector or remote control to enter
the input source interface.
Step 3: Select USB and press 0K to enter
the module interface (the same of home
page).
Step 4: Select the corresponding Movie,
Music, Picture and text modules of the file
type, and press 0K to enter the file interface
Step 5: Select the file to be played in the file
interface and press 0K to select play.
Step 6: Press the return key to exit and
return to the main interface of the projector.
To Next Page
Loading...
