Trouble Shooting
Problem:
Cooler does not pump
water
Fan does not operate
Cause/Remedy:
• Water level is low. Fill with water and make sure Pump is activated.
• Pump may be defective. Replace pump.
• Check that unit is plugged into a 120V power receptacle.
• Check the fuse or breaker.
• If connected to a GFCI outlet, check if it is tripped.
8
7
8
7
4
6
5
3
2
1
3
Replacement Parts
No. Description CP35 CP65
1 Evaporative Media.......................................................110132-1 110132-2
2 Evaporative Media Frame Assembly...........................110870-1 110870-2
3 Set Of (4) Keepers .......................................................110871 110871
4 Pump ............................................................................110439 110439
5 Drain Plug ....................................................................110698 110698
6 Water Indicator Float ...................................................110872 110872-1
7 Swivel Casters - Non-Locking ....................................110822-6 110822-6
8 Swivel Casters - Locking.............................................110822-7 110822-7
4
To Previous Page
Loading...
Need help?
General
