Need help?Do you have a question about the unGer Rinse'N'Go Max and is the answer not in the manual?
General safety warnings for operating and servicing the unit, including precautions for children, electricity, and product handling.
Key points to follow when starting the system, including water usage, pressure limits, and system checks.
Steps to follow before opening the system for resin replacement, including shutting off water and disconnecting hoses.
Defines the intended personal use of the product for spot-free cleaning and prohibits other uses.
Overview of the Rinse 'N' Go Max™™ deionization system, showing its main components and connections.
Details the components and features of the Soap Blasting Nozzle, including spray delivery and control knobs.
Details the components and functions of the TDS Meter, including its LCD, buttons, and battery compartment.
Illustrates the Water-Fed Pole and Soft Wash Brush, showing their connection and features for cleaning.
Shows how the water supply hose connects to the inlet and details connection plugs.
Illustrates inlet and outlet adapters and plugs used for connecting hoses to the system.
Instructions for unpacking and inspecting the system and its components for damage.
Details correct placement of water input and output connections on the unit for proper function.
Guidance on inspecting the system for leaks, cracks, dents, and proper hose attachment before operation.
Steps for preparing the system for use, including locating water, positioning, and connecting hoses.
Emphasizes the need for the product to be upright for correct water flow through the resin.
Step-by-step instructions on how to use the TDS meter to measure water purity levels.
Detailed process for washing a vehicle using the system, including rinsing with pure water for spot-free results.
Explains how tap water hardness affects the lifespan of the resin filter and provides an estimate of rinses.
Steps for performing maintenance on the system after each use to ensure proper care and longevity.
Detailed step-by-step guide on how to open the unit and replace the resin filter.
Provides guidelines on storage conditions, temperature, and actions for storing the product for over 6 months.
Important warnings and instructions regarding button batteries in the TDS meter, including safety and replacement procedures.
Lists exclusions from the product's lifetime guarantee, detailing conditions and uses that are not covered.
Outlines conditions under which Unger is not liable for the product's function, focusing on misuse and non-compliance.
The Unger Professional Rinse 'N' Go Max™ system is a deionization system designed to produce low total dissolved solids (TDS) pure water for spot-free rinsing of vehicles, boats, RVs, and solar panels. It utilizes mixed bed ion exchange resin to remove impurities from ordinary tap water, resulting in water with less than 20 ppm TDS for general spot-free results and less than 10 ppm for spot-free glass. The system operates solely on tap water line pressure, typically ranging from 40-60 psi, and does not require external power.
The primary function of the Rinse 'N' Go Max™ system is to deionize tap water through an ion exchange process. Water flows into the system's lower connection port, travels upwards through the resin filter tank, and exits as pure water from the top connection. This pure water is intended for the final rinse of a vehicle after it has been washed with soap and water, eliminating the need for hand drying and preventing water spots or streaks. The system is designed for outdoor use and should be stored between 40°F and 100°F.
To Next Page
General
