UNI-T UPO3000E Series - User Defined Parameters

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
Query return {NEGative | POSitive}.
 For example：
:TRIGger:DELay:ARM:SOUR NEG set edge trigger source as NEGative
:TRIGger:DELay:ARM:SOUR? query return NEGative
:TRIGger:DELay:TRIGger:SOURce
 Command format：
:TRIGger:DELay:
TRIGger:SOURce {CHANnel1 | CHANnel2| CHANnel3| CHANnel4}
:TRIGger:DELay:
TRIGger:SOURce?
 Functional description：
Set the delay trigger source.
 Return format：
Query return{CHANnel1 | CHANnel2| CHANnel3| CHANnel4}。
 For example：
:TRIGger:DELay:
TRIGger:SOUR CHAN1 set channel 1 as the trigger source
:TRIGger:DELay:
TRIGger:SOUR? query return CHANnel1
:TRIGger:DELay:TRIGger:SLOPe
 Command format：
:TRIGger:DELay:
TRIGger:SLOPe {NEGative | POSitive}
:TRIGger:DELay:
TRIGger:SLOPe?
 Functional description：
Set edge trigger mode, POSitive and NEGative.
 Return format：
Query return {NEGative | POSitive}.
 For example：
:TRIGger:DELay:
TRIGger:SOUR NEG set edge trigger source as NEGative
:TRIGger:DELay:
TRIGger:SOUR? query return NEGative