To Next PageTo Next Page
Need help?Do you have a question about the UNI-T UT531 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Max DC Voltage Measurement | 1000V |
| Max AC Voltage Measurement | 750V |
| Max Current Measurement | 10A |
| Max Resistance Measurement | 40MΩ |
| Max Capacitance Measurement | 100μF |
| Data Hold | Yes |
| Backlight | Yes |
| Auto Range | Yes |
| NCV | Yes |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Relative Mode | Yes |
| MAX/MIN | Yes |
| Analog Bar | Yes |
| True RMS | Yes |
| Input Protection | Yes |
| Auto Power Off | Yes |
| Low Battery Indication | Yes |
| DC Current Ranges | 200μA, 2mA, 20mA, 200mA, 10A |
| AC Current Ranges | 200μA, 2mA, 20mA, 200mA, 10A |
| Duty Cycle | Yes |
| Display Count | 6000 |
| Display | LCD |
| Frequency Range | 10Hz to 10MHz |
| DC Voltage Ranges | 200mV, 2V, 20V, 200V |
| AC Voltage Ranges | 200V |
| Capacitance Ranges | 20nF, 200nF, 2μF, 20μF, 100μF |
| Battery | 9V (6F22) |
